SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 284

DI07-26
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
9. Remove the engine oil filler cap and adjust the mark on
camshaft to TDC position.
Y220_07043
10. Align the TDC mark on the crankshaft pulley to the guide
pin and rotate the pulley 720° counterclockwise. Check
the mark on the camshaft again.
Y220_07044
11. Disconnect the vacuum line of EGR vacuum modulator
(1), the vacuum line of turbo charger vacuum modulator
(2) vacuum line and connectors.
Notice
Be careful not to be mixed the lines when installing.
Y220_07045
12. Unscrew the bolts and remove the intake manifold
mounting bracket.
- Upper bolts: 13M/ 2EA
Lower boltes: 5M/ 2EA (Hexagon bolt)
Tightening torque
Y220_07046
23 ± 2.3 Nm
FUEL SYSTEM
DI ENG SM - 2004.4