SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 424

DI10-64
DTC Trouble
P1614 ECU C2I/MDP Fault
P1615 ECU Fault
P1616 ECU Fault
P1606 ECU Fault
P1620 ECU Fault
P1621 ECU Fault
P1622 ECU Fault
P1603 ECU Fault
P1604 ECU Fault
P1605 ECU Fault
P1148 Accelerometer
Sensor) Learning Fault
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Help
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
(Knock - Check if the MDP is successful.
- Check the accelerometer (knock
sensor) sensor and wiring harness.
- Replace the ECU if required.
Torque Torque Delayed
Reduction Reduction Engine
(max.50%) (max.20%) Stop
O
Immediately Limp
Engine Home
Stop Mode
O
O
O
O
O
O
O
O
O
O
DIAGNOSIS
DI ENG SM - 2004.4