Hp Pump - Disassembly And Reassembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI02-52
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

HP Pump - Disassembly and Reassembly

Preceding works:
- Removal of fan belt (including cooling fan and fan clutch)
and fan shroud
- Removal of intake manifold assembly
- Removal of water pump pulley
- Removal of auto tensioner
- Removal of EGR pipe
- Removal of oil dipstic gauge
Y220_02134
Notice
• To prevent oil leaks, store the removed auto tensioner
in upright position.
• Be careful not to damage the rubber bellows.
• Plug the oil ports for HP pump with sealing caps.
1. Set crankshaft pulley to OT point. Open the oil filler cap
and check if the cam shaft notch marking is aligned to
OT point.
Y220_02135
2. Remove the cooling fan idle pulley with a pulley holder
(special tool).
Y220_02136
ENGINE HOUSING
DI ENG SM - 2004.4