SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 106

8. Fit the timing chain onto the camshaft sprockets and
install the upper guide rail.
• Install the clamping guide rail pin.
Notice
• Install the guide rail with slanted side facing
forward.
• Be careful not to change the timing of HP pump
when fitting the timing chain.
9. Tighten the intake and exhaust camshaft sprocket bolts.
Tightening torque
10. Install the camshaft position sensor.
11. Apply the Loctite to the bolt and tighten it.
Tightening torque
12. Check the intake camshaft before installing the vacuum
pump.
13. Install the intake manifold. Install the oil cooler with new
gasket.
Tightening torque
Notice
Ensure that there is no leaks around the coolant line
for #1 cylinder
ENGINE HOUSING
DI ENG SM - 2004.4
25 ± 2.5 Nm,
90° + 10°
10 Nm
25 Nm
DI02-11
Y220_02028
Y220_02029
Y220_02030
Y220_02031
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN