Fuel Transfer Line; Sectional View Of Fuel Pump; Sectional View Of Transfer Pump - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI07-12

FUEL TRANSFER LINE

Transfer Pump
Description
The transfer pump is the device to provide sufficient fuel to high fuel pressure line and is mechanical type feed pump that
is driven by timing chain linked to crankshaft. This mechanical type feed pump is subject to air inflow, therefore, a hand
priming pump is installed to fill fuel in Low fuel pressure(LP) circuit.
The transfer pump is included in the housing of the HP pump. The transfer pump is the volumetric blade type pump and
consists of the following components:
• A rotor turned by the shaft of the HP pump. The connection is provided by splines.
• An eccentric liner fixed to the housing of the HP pump by 6 Torx bolts. The liner is positioned by two off-set pins in
order to prevent any assembly errors.
• Four blades set at 90°. Each blade is held against the liner by a coil spring.
• The inlet and outlet orifice.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Transfer pump HP pump
<Sectional view of fuel pump>
<Sectional view of transfer pump>
Y220_07018
FUEL SYSTEM
DI ENG SM - 2004.4