SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 167

8. Remove the brackets and connectors from top section of
the engine.
- Vacuum hose bracket in turbo charger
- Booster pressure sensor
- Main wiring bracket
- Ground cable bracket
- Fuel pressure sensor connector
9. Unscrew the bolts and remove the vacuum modulator
bracket.
Tightening torque
10. Remove the HP pump fuel supply line bolts.
11. Remove the HP pump fuel supply line mounting bracket.
12. Remove the HP pump fuel return line at fuel filter.
Notice
• Plug the openings of pipes and ports with sealing
caps to keep the cleanness of the fuel system.
• Replace the pipes with new one once removed.
13. Remove the injector return line at HP pump.
Notice
• Be careful not to damage the pipes to HP pump.
• Plug the fuel return port of the HP pump with a
sealing cap.
INTAKE SYSTEM
DI ENG SM - 2004.4
9.0 Nm
DI03-19
Y220_03037
Y220_03038
Y220_03039
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN