SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 285

13. Disconnect the connector behind HP pump, fuel pipes
and hose lines.
1) Fuel temperature sensor connector (green)
2) IMV connector
3) Fuel return hose (be careful not to break the HP
pump connecting port)
4) Venturi hose
Notice
Plug each opening with sealing cap.
14. Remove the coolant temperature sensor and the knock
sensor.
Tightening torque
Knock sensor
Temperature sensor
15. Unscrew the bolts and remove the high fuel pressure
pipes at HP pump and common rail. Plug the openings
with sealing caps.
Tightening torque
Notice
Replace the fuel pipes with new ones.
16. Remove the HP pump mounting bracket at engine.
Tightening torque
FUEL SYSTEM
DI ENG SM - 2004.4
Nm
22 Nm
20 Nm
40 Nm
23 ± 2.3 Nm
DI07-27
Y220_07047
Y220_07048
Y220_07049
Y220_07050
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN