SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 282

DI07-24
Removal
Preceding Works
- Disconnection of negative battery cable
- Removal of engine cover
The trouble diagnosis should be performed before removing the HP pump. Refer to "Diagnosis" section.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
1. Remove the bolts on the fan shroud. Disconnect the air
intake duct from intake manifold and the coolant outlet
port connecting hose.
Notice
Plug the coolant port not to get the coolant into the
engine. Add the coolant as required when installing.
Y220_07036
2. Remove the fan belt while pressing down the auto
tensioner adjusting bolt.
Y220_07037
3. Unscrew the center bolt and remove the cooling fan clutch
while holding the pulley with counter holder (special tool).
Tightening torque
4. Remove the fan shroud and fan clutch simultaneously.
Y220_07038
45 ± 4.5 Nm
FUEL SYSTEM
DI ENG SM - 2004.4