Radius Commands - Dell S4810 Reference Manual

Defaults The default encryption type for the password option is 0. The default encryption
type for the secret option is 0.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Version 9.2(1.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage To view the defined user names, use the show running-config user
Information
command.
Related
password
Commands
show running-config

RADIUS Commands

The following RADIUS commands are supported by Dell Networking OS.
Security
Added support for roles on the Z9000, S6000, S4820T,
S4810, MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the secret option and the MD5
password encryption. Extended the name from 25 to 63
characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— specifies a password for users on terminal lines.
— views the current configuration.
1469