Rep 7.26 Feeder Left Cover; Rep 7.27 Feeder Rear Cover - Xerox Phaser 4620 Service Manual

REP 7.26 Feeder Left Cover

Parts List on PL 7.15 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Removal of the Left Cover is possible without removing the feeder from the printer.
1. Remove the Tray.
2. Remove 1 screw (plastic) and slide the cover to the rear to release 6 hooks that secure
the cover, Figure 1.
Figure 1 Remove the Left Cover
Replacement
To install the Left Cover on a 550-Sheet Feeder removed from the system, lower the safety
hook into the feeder chassis and with the slider completely forward, replace the cover.
Repairs
REP 7.26, REP 7.27
WARNING

REP 7.27 Feeder Rear Cover

Parts List on PL 7.15 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Removal of the Rear Cover is possible without removing the feeder from the printer.
1. Remove the Tray.
2. Remove the Right Cover, REP
3. Remove the Left Cover REP
4. Remove 2 screws (plastic), and release 2 hooks that secure the Rear Cover,
Figure 1 Remove the Rear Cover
5/2011
4-42
WARNING
7.25.
7.26.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual