RRP 3-3 Duplex Unit Rear Cover (PL 14.1)
Fig 3-9 Duplex Unit Rear Cover
Removal
1.
Remove the two screws, shown in the figure, securing the Rear Cover to the
Duplex Unit, and remove the cover.
Replacement
1.
Position the Rear Cover over the Duplex Unit.
2.
Route the Support Cable through the cutout in the side of the Rear Cover.
3.
Seat the Cover on the Duplex Unit, and use two screws to secure the Cover.
3-528
DocuPrint N4525 Network Laser Printer - Service Guide
S4525-254