Reset Saved-Configuration - H3C S5120-SI Series Command Reference Manual

Parameters
None
Description
Use the display startup command to display the configuration files used at the current system startup.
Related commands: startup saved-configuration.
Examples
# Display the configuration file used at the current system startup and the one to be used at the next
system startup.
<Sysname> display startup
Current startup saved-configuration file:
Next main startup saved-configuration file:
Next backup startup saved-configuration file:
Table 2-2 display startup command output description
Current Startup saved-configuration file
Next main startup saved-configuration file
Next backup startup saved-configuration file

reset saved-configuration

Syntax
reset saved-configuration [ backup | main ]
View
User view
Default Level
2: System level
Parameters
backup: Deletes the backup startup configuration file.
main: Deletes the main startup configuration file.
Description
Use the reset saved-configuration command to delete the startup configuration file saved on the
storage medium of the device.
Note that:
This command will permanently delete the configuration file from the device. Use it with caution.
On a device that has the main and backup startup configuration files, you can choose to delete
either the main or backup startup configuration file. However, in the case that the main and backup
startup configuration files are the same, if you perform the delete operation for once, the system will
Field
flash:/config.cfg
flash:/config.cfg
NULL
Description
The configuration file used for the current startup
Main configuration file used for the next startup
Backup configuration file used for the next startup
2-9