Displaying Ssh Configuration - H3C S3600 Series Operation Manual

Operation Manual – SSH Terminal Service
H3C S3600 Series Ethernet Switches-Release 1510
Quit to public key view
Quit to system view
Specify the name of the
host public key of the SSH
server to be accessed on
the SSH client
Connect the SSH client to
the SSH
specify the preferred key
exchange algorithm, the
preferred
algorithm
preferred
algorithm for the SSH
client and the SSH server
III. Specifying a source IP address/interface for the SSH client
You can perform the following configuration to specify a source IP address or a source
interface for the SSH2.0 client, thus enhancing traffic manageability.
Table 1-12 Specify a source IP address/interface for the SSH client
Enter system view
Specify a source IP address
for the SSH2.0 client.
Specify a source interface
for the SSH2.0 client

1.1.5 Displaying SSH Configuration

After the above configuration, you can execute the display command in any view to
display the configuration information and running status of SSH, so as to verify your
configuration.
Operation
public-key-code end
peer-public-key end
ssh client { server-ip |
server-name
rsa-key keyname
ssh2
host-name } [ port-num ]
[
{
server, and dh_exchange_group } |
prefer_ctos_cipher
{ des | aes128
encryption prefer_stoc_cipher
and the { des
HMAC prefer_ctos_hmac
{ sha1 | sha1_96 | md5 |
md5_96
prefer_stoc_hmac
{ sha1 | sha1_96 | md5 |
md5_96 } ] *
Operation
Command
} assign
{ host-ip
prefer_kex
dh_group1
} |
| aes128 } |
}
Command
system-view
ssh2 source-ip ip-address
ssh2 source-interface
interface-type interface-number
1-21
Chapter 1 SSH Terminal Service
Description
—
The input public keys are
saved when you quit the
public key edit view.
—
Required
|
|
Required
|
Description
—
Optional
Optional