Displaying Qos Configuration - H3C S3100-52P Operation Manual

Operation Manual – QoS
H3C S3100-52P Ethernet Switch
weight of queue 1: 2
weight of queue 2: 3
weight of queue 3: 4
weight of queue 4: 5
weight of queue 5: 9
weight of queue 6: 13
weight of queue 7: 15

1.8 Displaying QOS Configuration

After finishing the configurations mentioned above, you can execute the display
command in any view to check the running state of the QoS profile after the
configuration. You can verify the effect of the configuration by checking the information
on display.
Table 1-12 Display the QoS configuration
Operation
Display
configuration of protocol
packet precedence
Display
between 802.1p Priority
and Queues
Display
configurations on a port
or all ports
Display the rate limit
configuration
Display
queue
configuration
the
display protocol-priority
the Mapping
display
cos-local-precedence-map
all QoS display
{interface-type
unit-id } all
display
{ interface-type interface-number |
unit-id } line-rate
the global
scheduling display queue-scheduler
Command
qos-interface
interface-number
qos-interface
1-15
Chapter 1 QoS Configuration
Description
qos
You can
execute
display
|
command in any
view
the