Chapter 4 Device Management; Introduction To Device Management; Device Management Configuration; Device Management Configuration Tasks - H3C S3600 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510

Chapter 4 Device Management

4.1 Introduction to Device Management

The device management function of the Ethernet switch enables the display of current
status and event-debugging information of the system. Through this function, you can
maintain and manage the status and communication of the physical devices, and
restart the system when some functions of the system are exceptional.

4.2 Device Management Configuration

4.2.1 Device Management Configuration Tasks

Table 4-1 Device management configuration tasks
Reboot
switch
Schedule a reboot on the
switch
Specify the ARP to be
adopted at reboot
Update the BootROM
Update the host software
in the Fabric

4.2.2 Rebooting the Ethernet Switch

You can perform the following operation in user view when the switch is faulty or needs
to be rebooted.
Note:
Before rebooting, the system checks whether there is any configuration change. If yes,
it prompts whether or not to proceed. This prevents the system from losing the
configurations in case of shutting down the system without saving the configurations
Operation
the Ethernet
—
Optional
Optional
Optional
Optional
Description
Section 4.2.2
Ethernet Switch"
Section 4.2.3 "Scheduling a Reboot
on the Switch"
Section 4.2.4 "Specifying the APP
to be Adopted at Reboot"
Section 4.2.5
BootROM"
Section 4.2.6 "Upgrading the Host
Software in the Fabric"
4-1
Chapter 4 Device Management
Related section
"Rebooting the
"Upgrading the