Port Configuration And Management; Configuring A Combo Interface - H3C SR6604 Installation Manual

To display the alarming thresholds of a module:
Step
Enter system view.
1.
Display the temperature
2.
information of your router.

Port configuration and management

Configuring a combo interface

Combo interface overview
A combo interface is a logical interface comprising an SFP port of a transceiver module and an RJ-45
Ethernet port. The two ports share one forwarding interface, so they cannot work simultaneously.
When you enable either port, the other port is automatically disabled. You can select to activate a
port as needed.
Configuration prerequisites
Use the display interface interface-type interface-number command to find out
which port is an SFP port and which port is an RJ-45 Ethernet port.
•
If the output includes "Media type is not sure, Port hardware type is No connector", it means that
the port is an SFP port. For example, the following output shows that GigabitEthernet 5/0/1 is an
SFP port.
[Sysname] display interface GigabitEthernet 5/0/1
GigabitEthernet5/0/1 current state: DOWN
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-fc00-7506
Description: GigabitEthernet5/0/1 Interface
Loopback is not set
Media type is not sure,Port hardware type is No connector
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
•
If the output includes "Media type is twisted pair, Port hardware type is 1000_BASE_T", it
means that the interface is an RJ-45 Ethernet port. For example, the following output shows
that GigabitEthernet 5/0/0 is an RJ-45 Ethernet port.
[Sysname] display interface GigabitEthernet 5/0/0
GigabitEthernet5/0/0 current state: DOWN ( Administratively )
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-fc00-7506
Description: GigabitEthernet5/0/0 Interface
Loopback is not set
Media type is twisted pair
Port hardware type is
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Command
system-view
display environment
1000_BASE_T
62
Remarks
N/A
Optional
Available in any view