Boot Menu - H3C S3600 Series Operation Manual

System maintenance and debugging

Hide thumbs Also See for S3600 Series:

Table of Contents

Operation Manual – System Maintenance and Debugging

H3C S3600 Series Ethernet Switches-Release 1510

Note:

The loading process of the BootROM software is the same as that of the host software,

except that during the former process, you should press <Ctrl+U> and <Enter> after

entering the BOOT menu and the system gives different prompts. The following text

mainly describes the BootROM loading process.

1.2.1 BOOT Menu

Starting......

Press Ctrl-B to enter Boot Menu...

Press <Ctrl+B>. The system displays:

Password :

Note:

To enter the BOOT menu, you should press <Ctrl+B> within five seconds after the

information "Press Ctrl-B to enter BOOT Menu..." displays. Otherwise, the system

starts to extract the program; and if you want to enter the BOOT Menu at this time, you

will have to restart the switch.

***********************************************************

H3C S3600-28P-SI BOOTROM, Version 320

***********************************************************

Creation date

: Apr

CPU type

: BCM4704

CPU Clock Speed : 200MHz

BUS Clock Speed : 33MHz

Memory Size

: 64MB

Mac Address

: 00e0fc123450

1-2

Chapter 1 BootROM and Host Software

10 2007, 15:30:51

Table of Contents