Ftp Server Configuration Example - H3C S5500-EI series Operation Manual

Operation Manual – File System Management
H3C S5500-EI Series Ethernet Switches
Assign the FTP service to
the user
Specify the directory an
FTP user can access
Set the priority level of the
FTP user
Note:
If FTP server performs authentication, authorization and accounting (AAA) policy on
FTP client, AAA related parameters should be configured on the FTP server. For more
information about the local-user, password, service-type ftp, and work-directory
commands and the AAA related configuration, refer to the AAA-RADIUS-HWTACACS
Configuration part of the manual.

2.3.3 FTP Server Configuration Example

I. Network requirements
Use your device as an FTP server. Create a user account for an FTP user on it,
setting the username to abc and the password to pwd, and setting the priority
level to 3.
The IP address of the Ethernet interface is 1.1.1.1/16.
The PC serves as the FTP client.
To do...
service-type ftp
work-directory
directory-name
level level
Use the command...
2-9
Chapter 2 FTP Configuration
Remarks
Required
By default, the system
does not support
anonymous FTP access,
and does not assign any
service. If the FTP service
is assigned, the root
directory of the device is
used by default.
Optional
By default, the FTP/SFTP
users can access the root
directory of the device.
Optional
0 by default
To upload files to an FTP
server, you need to set
the FTP user level to 3.