Ftp Configuration: A Switch Operating As An Ftp Server - H3C S3100-52P Operation Manual

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
FTP Configuration: A
Switch Operating as an
FTP Server
FTP Configuration: A
Switch Operating as an
FTP Client

1.2.1 FTP Configuration: A Switch Operating as an FTP Server

I. Creating an FTP user
Configure the user name and password for the FTP user and set the service type to
FTP. To use FTP services, a user must provide a user name and password for being
authenticated by the FTP server. Only users that pass the authentication have access
to the FTP server.
Follow these steps to create an FTP user:
Enter system view
Add a local user and enter
local user view
Configure a password for
the specified user
Configure the service type
as FTP
Task
Creating an FTP user
Enabling an FTP server
Configuring connection idle time
Specifying the source interface and
source IP address for an FTP server
Disconnecting a specified user
Configuring the banner for an FTP
server
Displaying FTP server information
Basic configurations on an FTP
client
Specifying the source interface and
source IP address for an FTP client
To do...
system-view
local-user user-name
password { simple |
cipher } password
service-type ftp
Chapter 1 FTP and SFTP Configuration
Use the command...
1-3
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
—
Optional
Remarks
—
Required
By default, no local user is
configured.
Optional
By default, no password is
configured.
Required
By default, no service is
configured.