Skipping Current System Configuration - H3C SR6604 Installation Manual

Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9):

Skipping current system configuration

1. Reboot the router to access the EXTEND-BOOTWARE menu, and then enter
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Skip Authentication for Console Login
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 6
After the configuration skipping flag is set successfully, the following message appears:
Flag Set Success.
2. When the EXTEND-BOOTWARE menu appears again, enter
The router starts up with empty configuration.
3. To use the configuration in the next-startup configuration file, load the file in system view.
<sysname> system-view
[sysname] configuration replace file startup.cfg
Current configuration will be lost, save current configuration? [Y/N]:n
Info: Now replacing the current configuration. Please wait...
Info: Succeeded in replacing current configuration with the file startup.cfg.
4. Configure a new console login password.
In the following example, the console login authentication mode is password and the
authentication password is 123456. For security, the password is always saved in hashed
format to the configuration file, regardless of whether you specify the
keyword for the
<sysname> system-view
[sysname] user-interface console 0
[sysname-ui-console0] authentication-mode password
[sysname-ui-console0] set authentication password simple 123456
5. To make the settings take effect after a reboot, save the running configuration to the
next-startup configuration file.
set authentication password
8-86
to reboot the router.
0
keyword or
simple
command.
.
6
|
|
|
|
|
|
|
|
|
|
hash