File System Configuration Example - H3C S3100-52P Operation Manual

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch
Table 1-5 Configuration on prompt mode of file system
Enter system view
Configure the prompt
mode of the file system

1.1.7 File System Configuration Example

# Display all the files in the root directory of the file system.
<Sysname> dir /all
Directory of unit1>flash:/
1 (*)
2 (*)
3
4
5
6
7
7239 KB total (3585 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute
# Copy the file flash:/config.cfg to flash:/test/, with 1.cfg as the name of the new file.
<Sysname> copy flash:/config.cfg flash:/test/1.cfg
Copy unit1>flash:/config.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/config.cfg to unit1>flash:/test/1.cfg...Done.
# Display the file information after the copy operation.
<Sysname> dir /all
Directory of unit1>flash:/
1 (*)
2 (*)
3
4
5
6
To do... Use the command...
system-view
file prompt { alert |
quiet }
-rw- 3579326 Mar 28 2007 10:51:22
-rw- 1235 Apr 03 2000 16:04:52
-rwh 151 Apr 03 2000 16:04:55
-rwh 716 Apr 04 2000 17:27:35
-rwh 572 Apr 04 2000 17:27:41
-rwh 548 Apr 04 2000 17:30:06
drw- - Apr 04 2000 23:04:21
(b) -with backup attribute
-rw- 3579326 Mar 28 2007 10:51:22
-rw- 1235 Apr 03 2000 16:04:52
-rwh 151 Apr 03 2000 16:04:55
-rwh 716 Apr 04 2000 17:27:35
-rwh 572 Apr 04 2000 17:27:41
-rwh 548 Apr 04 2000 17:30:06
Chapter 1 File System Management Configuration
—
Required
By default, the prompt mode
of the file system is alert.
1-5
Remarks
test.bin
config.cfg
private-data.txt
hostkey
serverkey
dsakey
test
test.bin
config.cfg
private-data.txt
hostkey
serverkey
dsakey