Configuring The Voice Vlan To Operate In Manual Voice Vlan Assignment Mode - H3C S3100 Series Operation Manual

When the voice VLAN is working normally, if the device restarts, in order to make the established voice
connections work normally, the system does not need to be triggered by the voice traffic to add the port
in automatic voice VLAN assignment mode to the local devices but does so immediately after the restart
or the changes.
Configuring the Voice VLAN to Operate in Manual Voice VLAN Assignment
Mode
Follow these steps to configure a voice VLAN to operate in manual voice VLAN assignment mode:
Enter system view
Set an OUI address that can be identified by
the voice VLAN
Enable the voice VLAN security mode
Set the voice VLAN aging timer
Enable the voice VLAN function globally
Enter port view
Enable voice VLAN on a port
Enable the voice VLAN legacy function on the
port
Set voice VLAN assignment mode on a port to
manual
Quit to system view
To do... Use the command...
system-view
voice vlan mac-address oui
mask oui-mask [ description
text ]
voice vlan security enable
voice vlan aging minutes
voice vlan vlan-id enable
interface interface-type
interface-number
voice vlan enable
voice vlan legacy
undo voice vlan mode auto
quit
1-9
Remarks
—
Optional
Without this address, the
default OUI address is
used.
Optional
By default, the voice
VLAN security mode is
enabled.
Optional
The default aging timer is
1,440 minutes.
Required
Required
Required
By default, voice VLAN is
disabled on a port.
Optional
By default, voice VLAN
legacy is disabled.
Required
The default voice VLAN
assignment mode on a
port is automatic.
—