Show Iparp Proxy - Extreme Networks ExtremeWare Command Reference Manual

show iparp proxy

show iparp proxy {<ip address> {<mask>}}
Description
Displays the proxy ARP table.
Syntax Description
ip address
mask
Default
N/A.
Usage Guidelines
If no argument is specified, then all proxy ARP entries are displayed.
Example
The following command displays the proxy ARP table:
show iparp proxy 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an IP address.
Specifies a subnet mask.
show iparp proxy
879