Show Iparp Proxy - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

show iparp proxy

show iparp proxy {<ip address> {<mask>}}
Description
Displays the proxy ARP table.
Syntax Description
ip address Specifies an IP address.
mask Specifies a subnet mask.
Default
N/A
Usage Guidelines
If no argument is specified, then all proxy ARP entries are displayed.
Example
The following command displays the proxy ARP table:
show iparp proxy 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1686 ExtremeWare 7.5 Command Reference Guide