Show Sflow Globally; Show Sflow On An Interface - Dell Force10 MXL Blade Configuration Manual

Show sFlow Globally

To view sFlow statistics, use the following command
Command Syntax
show sflow
Figure 29-2. show sflow Command Example
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343
77 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
69 sFlow samples dropped due to sub-sampling
FTOS#

Show sFlow on an Interface

To view sFlow information on a specific interface, use the following command
Command Syntax
show sflow interface
interface-name
Figure 29-3. show sflow interface Command Example
FTOS#show sflow interface tengigabitethernet 1/16
Tengig 1/16
Configured sampling rate
Actual sampling rate
Sub-sampling rate
Counter polling interval
Samples rcvd from h/w
Samples dropped for sub-sampling :6
508
| sFlow
Command Mode Purpose
EXEC Display sFlow configuration information and statistics.
Command Mode Purpose
EXEC Display sFlow configuration information and statistics on a
specific interface.
:8192
:8192
:2
:15
:33
(Figure 29-2):
Indicates sFlow is globally enabled
(Figure 29-3):