Show An Ipv6 Interface - Dell Force10 C150 Configuration Manual

Command Syntax
FTOS#show ipv6 ?
accounting IPv6 accounting information
cam linecard IPv6 CAM Entries for Line Card
fib linecard IPv6 FIB Entries for Line Card
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
FTOS#

Show an IPv6 Interface

View the IPv6 configuration for a specific interface with the following command.
Command Syntax
show ipv6 interface
port}
Figure 22-6 illustrates the
Command Mode
Command Mode
type {slot/ EXEC
show ipv6 interface
Purpose
Purpose
Show the currently running configuration for the
specified interface
Enter the keyword
interface and slot/port information:
• For all brief summary of IPv6 status and
configuration , enter the keyword
• For all IPv6 configured interfaces, enter the
configured.
keyword
• For a 10/100/1000 Ethernet interface, enter the
GigabitEthernet
keyword
port information.
• For a Gigabit Ethernet interface, enter the
GigabitEthernet
keyword
port information.
• For a 10 Gigabit Ethernet interface, enter the
TenGigabitEthernet
keyword
slot/port information.
• For a loopback interface, enter the keyword
loopback
followed by the loopback number
• For a linecard interface, enter the keyword
linecard
followed by the slot number
• For a port-channel interface, enter the keyword
port-channel
number
• For a VLAN interface, enter the keyword
followed by the VLAN ID
command output.
interface
followed by the type of
brief.
followed by the slot/
followed by the slot/
followed by the
followed by the port-channel
IPv6 Addressing | 501
vlan