Show Lldp Interface - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Parameters
Default
Default
Mode
Command
History
Related
Commands

show lldp interface

Syntax
Parameters
Default
Mode
Command
History
| Link Layer Discovery Protocol (LLDP) Commands
164
port-desc
sys-cap
sys-desc
sys-name
not enabled
2
Interface Config
Version 2.5.1 Introduced
lldp hello
lldp multiplier
lldp notification
show running-config
Display LLDP configuration for all interfaces.
show lldp interface {all | unit/slot/port}.In an SVL system, the [fdbid/all] parameter is not used
and will be ignored if entered.
interface unit/slot/port
all
none
Privileged Exec
Version 2.5.1 Introduced
Include/Exclude LLDP port description TLV (the description configured for
the transmitting port using the
Config mode).
Include/Exclude LLDP system capabilities TLV (general info about this
switch, e.g. 'switch, router'; not configurable).
Include/Exclude LLDP system description TLV (the system description that
show run
also appears in ; not configurable).
Include/Exclude LLDP system name TLV (the system name as configured
snmp-server name
globally by the
The interval in seconds to transmit local LLDP data
The interval multiplier to set local LLDP data TTL
Minimum interval to send remote data change notifications
Display current settings with values that differ from the default value.
For a particular interface, enter its ID in
all
Enter the keyword for all interfaces.
description
command within the Interface
command).
unit/slot/port f
ormat.