Ip Proxy-Arp; Ip Route - Dell Force10 MXL Blade Reference Manual

Parameters
ipv4-address
ipv4-address2...
ipv4-address6
Defaults No name servers are configured.
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage
FTOS does not support sending DNS queries over a VLAN. DNS queries are sent out all other
Information
interfaces, including the Management port.

ip proxy-arp

Enable Proxy ARP on an interface.
Syntax ip proxy - arp
To disable Proxy ARP, enter no ip proxy-arp .
Defaults Enabled.
Command Modes
INTERFACE
Command
Version 8.3.16.1
History
Related
show ip interface
Commands

ip route

Assign a static route to the switch.
Syntax ip route destination mask { ip- address | interface [ip-address]} [ distance ] [ permanent ] [ tag
tag-value]
To delete a specific static route, use the no ip route destination mask {address | interface
[ ip-address ]} command.
To delete all routes matching a certain route, use the no ip route destination mask command.
Parameters
destination
mask
ip-address
Enter the IPv4 address, in dotted decimal format, of the name server to be used.
(OPTIONAL) Enter up five more IPv4 addresses, in dotted decimal format, of name
servers to be used.
Separate the addresses with a space.
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Displays the interface routing status and configuration.
Enter the IP address in dotted decimal format of the destination device.
Enter the mask in slash prefix formation (/x) of the destination device's IP address.
Enter the IP address in dotted decimal format of the forwarding router.
IPv4 Routing | 303