Debug Dhcp Packet - Dell PowerEdge M420 Reference Manual

Examples
The first example is for routing interfaces.
console#renew dhcp vlan 2
The second example is for out-of-band port.
console#renew dhcp out-of-band

debug dhcp packet

Use the debug dhcp packet command in Privileged EXEC mode to display
debug information about DHCPv4 client activities and to trace DHCPv4
packets to and from the local DHCPv4 client. To disable debugging, use the
no form of this command.
Syntax
debug dhcp packet [transmit | receive]
no debug dhcp packet [transmit | receive]
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
DHCP client already has packet tracing. This command turns the packet
tracing on.
Example
The first example is for transmit and receive flows.
console#debug dhcp packet
The second example is for transmit flow.
320
DHCP Management Interface Commands