Dell PowerEdge M420 Reference Manual page 322

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Term
DHCP Lease server The IPv4 address of the DHCP server that leased the address.
State
DHCP transaction
id
Lease
Renewal
Rebind
Retry count
Examples
The following example shows the output from this command when the
device has leased two IPv4 addresses from the DHCP server.
console#show dhcp lease
IP address: 10.1.20.1
Subnet mask: 255.255.255.0
DHCP Lease server: 10.1.20.3, state: 5 Bound
DHCP transaction id: 0x7AD
Lease: 86400 secs,
Retry count: 0
IP address: 10.1.1.2
Subnet mask: 255.255.255.0
DHCP Lease server: 10.1.1.1, state: 5 Bound
DHCP transaction id: 0x11EB
Lease: 86400 secs,
Retry count: 0
console#show dhcp lease interface vl10
IP address: 10.1.20.1
322
DHCP Management Interface Commands
Description
State of the DHCPv4 Client on this interface.
The transaction ID of the DHCPv4 Client.
The time (in seconds) that the IP address was leased by the
server.
The time (in seconds) when the next DHCP renew Request is
sent by DHCPv4 Client to renew the leased IP address.
The time (in seconds) when the DHCP Rebind process starts.
Number of times the DHCPv4 client sends a DHCP
REQUEST message before the server responds.
on interface VLAN10
Renewal: 43200 secs,
on interface VLAN20
Renewal: 43200 secs,
on interface VLAN10
Rebind: 75600 secs
Rebind: 75600 secs

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents