Dns-Server (For Ipv6) - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

dns-server (for IPv6)

dns-server ipv6AddressPrimary [ ipv6AddressSecondary ]
Syntax
no dns-server
Command introduced in JUNOSe Release 10.1.0.
Release Information
Configures the primary and secondary IPv6 DNS server addresses in the IPv6 local
Description
address pool. The DNS server addresses are returned to the client in DHCPv6
responses as part of the DNS Recursive Name Server option. The no version removes
the configured DNS server addresses.
Options
IPv6 Local Pool Configuration
Mode
ipv6AddressPrimary IPv6 address of the primary DNS server.
ipv6AddressSecondary IPv6 address of the secondary DNS server.
Chapter 5: D Commands
533
dns-server (for IPv6)