Key-String - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

key-string

key-string keyStringData
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Manually configures a 1024-bit or 2048-bit ISAKMP/IKE public key that a remote
Description
peer uses for RSA authentication without the need for a digital certificate. The key
string represents the public key hexadecimal data that includes the ASN.1 object
identifier and sequence tags for RSA encryption. There is no no version. To remove
a peer public key from the router, use the no version of the ipsec key pubkey-chain
rsa command.
Options
IPSec Peer Public Key Configuration
Mode
1130
key-string
keyStringData Alphanumeric string with a maximum length of 1999 characters;
delimited by the first character of the string, which must be repeated at the end
of the string and must not occur anywhere else in the string