FujiFilm VisualSonics Vevo F2 User Manual page 64

To Modify Measurement Properties
Each measurement has its own set of measurement properties that you can modify.
1. Tap a measurement in the Measurements panel.
2. Tap the Properties button.
3. The Measurement Properties panel is displayed.
Label: Tap the text box and modify the existing label as required.
o
Font Size: Tap the Font Size and select the preferred size; range is from 6 to 48.
o
Show Physiological Parameters: Select to show physiological parameters on both the
o
measurement label and on the Measurement panel.
4. Tap the parameters that you want to display. The number and type of items displayed changes
depending on the type of measurement that is selected.
To Delete a Measurement
1. On the Measurements panel, tap the measurement you want to delete.
2. Tap the Delete button displayed below the selected measurement.
To delete all measurements on an image, tap Delete All at the bottom of the Measurements panel, and
accept the confirmation prompt that appears.
Session Tasks
Vevo F2 Imaging System User Manual
64