Saving Images - FujiFilm VisualSonics Vevo F2 User Manual

1. Tap the Screen Pointer button located on the top right corner of any control panel.
2. Once enabled, the panel becomes a template for the image display.
3. Tap and drag anywhere within the template to display a red pointer on the image display.
4. To disable the Screen Pointer, tap the active screen pointer icon the top right corner or anywhere
outside of the panel.
Saving Images
You can save images as a frame or a clip. You can also save a frame from a clip.
When you save a frame or clip during live imaging, saving will happen in the background while the scanning
will continue uninterrupted (except when in PA-Mode).
When the system saves the image, a message will be displayed at the bottom of the image display as
follows:
Button
Save Frame
Save Clip
Session Tasks
Frame Stored.
Clip Stored.
Vevo F2 Imaging System User Manual
Message
98