FujiFilm VisualSonics Vevo F2 User Manual page 311

Dragging any slider makes the value appear in a flyout above the slider.
l
To reset the sliders to their default positions, tap the TGC Reset button(
l
If the user is capturing data while adjusting values in this menu and an incompatible voltage value is
selected, data capture automatically stops, and the following message appears.
Graph
This is a graph that shows a live stream of ADC data for the currently selected Tx/Rx Event. To turn it on,
tap the Capture Data button (7).
Modes
Warning when capturing data
Vevo F2 Imaging System User Manual
)
311