FujiFilm VisualSonics Vevo F2 User Manual page 219

To Save EKV Data
If you have chosen to save the EKV data, once you have optimized your c lip, you can delete this extra data
at any time. Open the image and enable the Save EKV data for post-processing option on the Review
Setup panel, accessed through the EKV tab in review. If this option is changed to off, the extraneous data
will be deleted the next time you tap Save Clip.
To Refine Image Detail Quality
1. Acquire an EKV (or PA EKV) clip, or open an EKV (or PA EKV) image from the Study Browser.
2. Tap the EKV tab to open the Review Setup panel.
3. In the Process Quality drop-down menu, select the desired quality level:
Sharp: Emphasizes quality of detail in each frame.
o
Standard: Emphasizes smoothness of movement through the clip.
o
Smooth: Maximizes smoothness of movement throughout the clip.
o
4. Tap Process to re-process the EKV data.
5. In the Motion Correction drop-down list, select the desired method for compensating for motion
artifacts:
Respiration: Uses respiration signals if available.
o
Comparison: Uses autocorrelation to detect motion artifacts.
o
Add Generic EKV Measurements
Measurements can be added to an EKV Mode or PA EKV image the same way they are with other imaging
modes.
Modes
Vevo F2 Imaging System User Manual
219