FujiFilm VisualSonics Vevo F2 User Manual page 96

Control
Tap this control to enable split screen viewing. This feature allows you to compare two
images side by side in the image display, or to view a stored or acquired image next to a
live image.
Split Screen
Tap Split Screen to turn on Split Screen view and configure the view:
l
l
l
Tap this control to start a save for frame based modes. This button clears the existing
buffer, then acquires and saves the number of frames (or length of time) specified for
Start
that mode.
Recording
This control is disabled during review.
Available for B-Mode, PA-Mode (Single), PA-Mode (Oxy-Hemo), PA-Mode (Multi-
wavelength), Color Doppler Mode, Power Doppler Mode, and Nonlinear Contrast Mode.
Vevo Voice
Tap this button to enable Vevo Voice. It provides voice activated controls during live
scanning and in review. See Vevo Voice on page 396 for a list of commands and
hardware suggestions.
Voice Volume
Adjusts the volume level when using Vevo Voice. Tap Voice Volume and adjust the
volume using the slider flyout.
Session Tasks
Off – Turn split screen view off.
Sync Play – Syncs the playback between two frame-based images.
L/R – Toggles between the left and right images panels on the image display.
Note: Only one side can be acquiring live data at a time.
Vevo F2 Imaging System User Manual
Description
96