Control Panel Interface (Review) - FujiFilm VisualSonics Vevo F2 User Manual

Save Clip: Saves the currently captured images as a video clip.
l
Vevo Voice: Refers to the Vevo Voice feature. For more information, refer to Vevo Voice on
l
page 396.
Note: For more information about general controls, refer to General Controls on
page 93.
Imaging Controls
The bar along the right of the interface contains controls that adjust or refine the image. This list serves as a
hotbar, allowing the user to easily access commonly used adjustment features.
To use an imaging control, tap the control mode button.
l
To set which imaging controls appear on this bar, tap More Controls.
l
Note: For more information about the More Controls menu, refer to Imaging
Controls on page 97.
Control Panel Interface (Review)
When viewing a previously saved image, the control panel displays a different set of controls than those that
appear during a scanning session.
The controls that appear when reviewing an image allow the user to manipulate the view of the recorded
image, as well as add markup to it.
Note: The control layout in review mode is stored separately from the control
layout in scanning mode. Users can customize the control layout in one mode
without interfering with the layout in the other mode.
The control panel interface is split into the following sections.
Session Tasks
Vevo F2 Imaging System User Manual
41