FujiFilm VisualSonics Vevo F2 User Manual page 373

This saves all parameters currently being used for all imaging modes. Saved presets can be loaded
later using the Presets button.
2. At the Save Preset dialog, enter or select a preset name.
To create a new preset, enter a new name in the text field.
o
To overwrite the settings of an existing preset, tap the arrow icon to the right of the text field
o
and select the name of the preset to overwrite.
3. Tap Done.
Once you tap Done, the system saves all parameters for all imaging modes in the preset.
Saved presets can be loaded later by tapping the Presets control.
Overwriting Precautions
When you save a preset with a name that already exists, you overwrite all settings previously saved on that
preset name.
Because saving a preset saves all settings for all modes, it is possible for a user to save a preset in a given
mode, thinking that it only updates settings for their currently selected mode, without realizing that it
overwrites settings for all other modes as well.
To avoid overwriting settings in this way, be aware of all settings in all modes (not just the currently selected
mode), or make sure to use different preset names for different modes.
Set a Default Preset
A default preset for a mode is the set of acquisition parameters that are used when a user begins scanning
in that mode. The default preset is highlighted in bold.
To set a default preset:
System Settings
Vevo F2 Imaging System User Manual
373