FujiFilm VisualSonics Vevo F2 User Manual page 170

Select a bookmarked (preset) wavelength.
l
Tap and drag the wavelength slider.
l
Tap the up/down buttons to adjust the wavelength in 1 nm increments.
l
Note: If a scan is currently active, the scan will stop and then restart a few
seconds after you select a new wavelength.
Note: To change bookmarked wavelengths, refer to Single Wavelength
Bookmarks.
Spectro
To customize spectro scan settings:
1. Tap Spectro Settings.
The Spectro Scan Settings menu appears.
2. Select a step size.
1 nm
o
5 nm
o
10 nm
o
Modes
Vevo F2 Imaging System User Manual
170