Control Panel Interface (Scanning) - FujiFilm VisualSonics Vevo F2 User Manual

Clip Buffer
Displays the length of the clip. When in review mode, there is a triangular white marker that identifies t he
individual frame number within the clip. To display a sub-range of the original clip, use the Clip Sub-range
button (refer to Clip Sub-range).
Status Bar
The following information is shown on the status bar:
Monitored physiological values in real time during image acquisition, if the Vevo Imaging Station is
l
connected and the system is configured appropriately. These value are color-coded to correspond to
the physiological trace.
Percentage of free space available for image data. Used to see when you should start to back up
l
image data to free up space on the system.
Current user name.
l
Current t ime.
l
Current Vevo Voice state (if enabled).
l
Laser status (if PA-Mode is initialized).
l
Various status updates when imaging parameters are changed and some image processing
l
progress information.
Control Panel Interface (Scanning)
During an imaging session, the control panel displays universal controls that can be used during any
scanning session, as well as controls that are specific to the currently selected scanning mode.
The control panel interface is split into the following sections.
Session Tasks
Vevo F2 Imaging System User Manual
38