Supported Microphones; To Enable Vevo Voice - FujiFilm VisualSonics Vevo F2 User Manual

1. Ensure you have a supported USB microphone connected to the Vevo F2 Imaging System.
2. Enable Vevo Voice.
3. Use voice commands as desired.
Note: It is highly recommended to complete voice training for the current user in
the Vevo Voice tab of the System Settings menu, but not required.
Note: The estimated training time varies for each user. Using Vevo Voice
regularly improves its accuracy.
Supported Microphones
Vevo Voice works with standard USB microphones. Acceptable microphones include:
A USB microphone
l
A USB webcam with a built-in microphone
l
A stereo microphone or headset with a USB adapter
l
Note: After you connect a microphone to the Vevo F2, you may need to restart
the system before the microphone is recognized.
To Enable Vevo Voice
Vevo Voice can be enabled in two different ways in the Vevo Voice tab of the System Settings menu:
Constantly On: Vevo Voice is always listening.
l
For example, to switch to B-Mode, say "Vevo go to B-Mode".
Toggle: Vevo Voice starts listening when you tap the Vevo Voice control on the General tab of the
l
More Controls menu.
For example, to switch to B-Mode, tap Vevo Voice and then say "Vevo go to B-Mode".
Vevo Voice automatically stops listening after recognizing a command.
The icon on the control changes to show whether Vevo Voice is listening or not.
Session Tasks
Vevo Voice (not listening)
Vevo Voice (listening)
Vevo F2 Imaging System User Manual
103