FujiFilm VisualSonics Vevo F2 User Manual page 286

Note: The delay that results from this setting varies depending on factors such as
the transmit delay profile, waveform preset, and the image depth.
Delay
A Delay block adds an additional block of time before the next transmit/receive event.
This is a delay that occurs independently of any other delays or settings in the pulse sequence.
Note: This block adds a time delay to only the next transmit/receive event. This
differs from the Set PRI delay, which affects all transmit/receive events that are
placed after it, if the Set PRI block was placed outside a loop (any blue block).
Interface
When a Delay block is selected, the following details appear:
The Pulse Sequences menu when a Delay block is selected
To set the delay, tap the Delay field and enter the desired delay (in microseconds).
Modes
Vevo F2 Imaging System User Manual
286