FujiFilm VisualSonics Vevo F2 User Manual page 129

Control Live/Review
RF
Save Preset
Show Values
and Labels
Sweep Speed
Transmit Power
M-Mode and AM-Mode Generic Measurements
The following generic measurements are available for M-Mode and AM-Mode images:
Modes
Toggles RF data collection and RF data display.
During live imaging, you can toggle both RF data collection and
RF data display.
Both
During review, the RF Display button is only enabled for images
that were captured with RF data.
For more information, refer to Digital RF o
Saves all current settings into a preset. Saved presets are
accessed through the Presets control.
Both
For more information:
Applications & Presets on page 365
l
Shows or hides measurement values and labels on an image in
Review
review.
Adjusts the scale of the data in the M-Mode window. A faster
sweep speed will increase the speed a nd compress the clip
Live
image.
To set the sweep speed, tap Sweep Speed and adjust the slider.
Adjusts the power of the ultrasound signal transmission.
To adjust the transmit power, tap this control, then select one of
the following power levels:
Live
Max
l
High
l
Med
l
Low
l
Min
l
Vevo F2 Imaging System User Manual
Description
n page 231.
129