Customizing Controls - FujiFilm VisualSonics Vevo F2 User Manual

Customizing Controls
There are three categories of controls on the control panel that can be customized. These controls can be
changed at any time during an imaging or review session.
Mode controls
l
General controls
l
Imaging controls
l
Customizing the Control Panel
For each of the three categories of customizable controls, there is a tab located in the More Controls panel
accessed through the More Controls button. By default, certain controls are shown on each of the
customizable bars. The remaining controls are always accessible in the More Controls window.
Note: You do not have to place a control on a hotbar to use it. Controls can be
tapped and used directly from the More Controls panel.
To Customize Your Controls
1. Tap More Controls.
2. Tap the desired tab within the More Controls panel. When live scanning, there is a Modes tab, a
General tab, and a tab for each active imaging mode.
Note:
3. Drag a control from the More Controls panel to its desired hotbar, or vice versa. There is one hotbar
for each type of control:
Imaging modes (from the Modes tab) go in the hotbar along the left of the control panel.
o
General controls (from the General tab) go in the hotbar along the bottom of the control panel.
o
Imaging controls (from its respective tab, such as B-Mode) go in the hotbar along the right of
o
the control panel.
Session Tasks
When reviewing an image, the Modes tab is not available.
Vevo F2 Imaging System User Manual
91