FujiFilm VisualSonics Vevo F2 User Manual page 78

10. You can also copy a measurement. Refer to Copying and Pasting PA Region Measurements below.
Copying and Pasting PA Region Measurements
When copying and pasting PA Region measurement, please keep the following in mind:
You can copy a PA Region measurement from a PA-Mode image and paste it to a nother PA-Mode
l
image image.
Pasting a measurement on the destination image will only be allowed if the image area is large
l
enough to fit the copied measurement.
Copying and pasting supports one or multiple measurements and is only available while reviewing
l
an image in the 2D view.
20 PA Regions are allowed on one PA-Mode image.
l
To Copy a Single PA Region Measurement
1. Tap the PA Region measurement you wish to copy.
2. Tap the copy button.
3. Acquire a new image, load an image into review or use the currently loaded image.
Session Tasks
Vevo F2 Imaging System User Manual
78