FujiFilm VisualSonics Vevo F2 User Manual page 171

3. Select a scan method appropriate for the laser port used.
Low to high scan (starts at 680 nm or 1200 nm)
o
High to low scan (starts at 970 nm or 2000 nm)
o
4. Tap Done.
Note:
switches to Spectro after you tap Done.
Oxy-Hemo
PA-Mode (Oxy-Hemo) settings are only available in acquisition mode.
To set Oxy-Hemo settings, tap the Oxy-Hemo Settings control.
This opens the following flyout menu:
This flyout menu contains controls for three settings: Display type, Threshold HbT, and sO
Modes
If this was not done while in Spectro mode, the system automatically
Vevo F2 Imaging System User Manual
range.
2
171