FujiFilm VisualSonics Vevo F2 User Manual page 453

Electrical Specifications
FUJIFILM VisualSonics manufactures the Vevo F2 Imaging System to operate with AC line v oltages of 100
V, 120 V, and 240 V. The electrical configuration of the system is n oted on the safety label.
100 V~, 50/60 Hz, 6 A
l
120 V~, 50/60 Hz, 5 A
l
240 V~, 50/60 Hz, 2.5 A
l
WARNING:
in the facility is adequate. Do not modify the attachment plug or use an adapter.
Doing s o may cause an electrical hazard.
WARNING:
Vevo LAZR-X laser cart.
Fuse Specifications
The Vevo F2 is protected by a series of replaceable fuses. If a fuse blows, it must be replaced by a
FUJIFILM VisualSonics service technician.
Fuses are to be approved to IEC 60127.
Specifications
Rated Current
Rated Voltage
Characteristic
Breaking capacity current AC
Specifications
Rated Current
Rated Voltage
Reference
Before having the system installed, ensure that the electrical service
Use only power cords provided by FUJIFILM VisualSonics with the
100 V / 120 V System Configurations
6.3 A
250 V
Time delay blow
1.5 kA
240 V System Configuration
4 A
250 V
Vevo F2 Imaging System User Manual
Value
Value
453