FujiFilm VisualSonics Vevo F2 User Manual page 258

To set the currently selected pulse sequence as the sequence to use in VADA Mode, tap Set as
l
Active Sequence.
Caution:
thermal management issues have been taken into consideration. When
selecting a user-created pulse sequence for the first time, a warning
message appears to remind the user to do this.
The current active sequence is shown in blue text on the list of sequences.
Error Checker
When in the Pulse Sequences or Preview tabs, the symbol that appears to the right of the Name text field
indicates whether the settings entered in the tab are valid.
If the symbol is an X (
l
cannot be used until all issues have been corrected.
If the symbol is a check mark (
l
Modes
When selecting a user-created pulse sequence, make sure
), there are one or more issues with the settings entered, and the profile
), the settings are valid and the profile is ready for use (once it is
Vevo F2 Imaging System User Manual
258