FujiFilm VisualSonics Vevo F2 User Manual page 100

To save only the frame, tap Save Frame.
l
Save Frame can be used to save a frame from an acquired or saved clip, as well as saving a frame
during imaging.
To save a clip, tap Save Clip.
l
This button can be used to save a clip while scanning (including existing data in the buffer), save an
acquired clip after tapping Freeze, and re-saving a clip with new parameters (i.e. changing the
display map or brightness).
Note:
the clip.
To record a frame-based clip, tap Start Recording.
l
Tap Start Recording button to clear the buffer, record or acquire, then save the number of frames
specified for that mode.
Tap Stop Recording to save the acquired truncated data. The system will continue to scan while
saving.
To Capture and Save a Clip
1. Ensure that clip settings are set as desired. See Configuring Clip Settings on the next page.
2. Tap Freeze.
3. (Optional) To trim the clip, tap Clip Sub-range and drag the sliders that appear on the Clip Slider to
the desired position. Tap Crop & Save.
4. Tap Save Clip.
Session Tasks
Placing measurements or annotations on a clip automatically saves
Vevo F2 Imaging System User Manual
100